Products
Contact Us
Service Hotline
Telephone:13932359348
Fax: 0313-3687997
Website:www.zlphj.com(Chinese)
en.zlphj.com(English)
Address: 100 m east of Xuanhua District Expressway Exit, Zhangjiakou City
YFW-100/YFW-160 type Swiss impeller balancing machine
Key words:
Classification:
- Product Description
- Scope of application
- Technical parameters
- Product Video
- File Download
-
- Commodity name: YFW-100/YFW-160 type Swiss impeller balancing machine
YFW-100/YFW-160 fan impeller balancing machine With the development of precision and high speed of rotating machinery, it is very important to reduce vibration, reduce noise, extend the service life of the machine and improve the safety performance of the machine. Therefore, it is an essential process to detect the dynamic balance of rotating machinery.
YFW-100/YFW-160 fan impeller balancing machine With the development of precision and high speed of rotating machinery, it is very important to reduce vibration, reduce noise, extend the service life of the machine and improve the safety performance of the machine. Therefore, it is an essential process to detect the dynamic balance of rotating machinery. YFW-100 balancing machine and YFW-160 balancing machine are two widely used general balancing machines. Its characteristics are: 1 hard support structure, that is, the rotating speed is far lower than the resonance speed of the system, so the operation is safe; 2 permanent calibration, simple operation. Therefore, it is very suitable for the dynamic balance check of motor rotor, small fan rotor, crankshaft, pulley and flywheel.
The machine can be equipped with ZL220 type electrical measuring box, can also be equipped with domestic more advanced with independent intellectual property rights of the ZL-2 dynamic balance test system, the test system hardware by the new USB data acquisition card and industrial control computer/one machine, with strong stability and anti-interference ability. Software part of the world by the United States NI company Labview prepared, the test software is more humane, can adapt to different levels and different occasions, while the software system functions can be extended.
-
Fan industry
-
YFW-100
Workpiece quality range
3~100kg
Maximum diameter of workpiece
φ100mm
Workpiece shaft diameter range standard roller frame
φ10-90mm
Support spacing range
60-1000mm/1700mm (or negotiated)
Minimum attainable residual unbalanceeSea
1g.mm/kg
Unbalance Reduction Rate URR
≥ 90%
Equilibrium speed (stepless speed regulation) or:
450/900，650/1300 rpm
YFW-160
Workpiece quality range
5-160kg
Short-time overload quality
300kg
Maximum diameter of workpiece
φ1100mm
Workpiece shaft diameter range
φ10-90mm
Support spacing range
60-1500mm (or negotiated)
Minimum attainable residual unbalanceeSea
1g.mm/kg
Unbalance Reduction Rate URR
≥ 90%
Note:
1. The specifications in the table are standard models, and the special requirements in the specifications shall be negotiated separately;
2. The speed in the table is approximate reference value;
3. The manufacturer reserves the right to modify the parameters of the table column. If there is any change, no further notice will be given.
YFW-100/YFW-160 fan impeller balancing machine With the development of precision and high speed of rotating machinery, it is very important to reduce vibration, reduce noise, extend the service life of the machine and improve the safety performance of the machine. Therefore, it is an essential process to detect the dynamic balance of rotating machinery. YFW-100 balancing machine and YFW-160 balancing machine are two widely used general balancing machines. Its characteristics are: 1 hard support structure, that is, the rotating speed is far lower than the resonance speed of the system, so the operation is safe; 2 permanent calibration, simple operation. Therefore, it is very suitable for the dynamic balance check of motor rotor, small fan rotor, crankshaft, pulley and flywheel.
The machine can be equipped with ZL220 type electrical measuring box, can also be equipped with domestic more advanced with independent intellectual property rights of the ZL-2 dynamic balance test system, the test system hardware by the new USB data acquisition card and industrial control computer/one machine, with strong stability and anti-interference ability. Software part of the world by the United States NI company Labview prepared, the test software is more humane, can adapt to different levels and different occasions, while the software system functions can be extended.
Previous Page
Previous Page
Online Inquiry
Related Products